Technical Specification

2X4 GVT SPECIFICATIONS

Sr.No.	Test Description	Standard Test Method	ISO 13006:2012 E Specification	MTM’S Value
1	Length and Width	ISO 10545-2 / EN 98	± 0.6 % (max +/-2.0 mm)	± 0.10%
2	Thickness	ISO 10545-2 / EN 98	± 5.0 % (max +/-0.5 mm )	± 4.0%
3	Straightness of sides	ISO 10545-2 / EN 98	± 0.5 % (max +/-1.5mm)	± 0.10%
4	Rectangularity	ISO 10545-2 / EN 98	± 0.5 % (max +/-2.0 mm )	± 0.10%
5	Surface flatness	ISO 10545-2 / EN 98	± 0.5 % ( max +2.0 mm )	± 0.15%
6	Surface Quality	ISO 10545-2 / EN 98	95% free from visible defects	> 95% free from visible defects
7	Water Absorption	ISO 10545-3 / EN 99	< 0.5%, Max 0.6%	≤ 0.5%
8	Breaking Strength, N	ISO 10545-4 / EN 100	Min 1300 N	Min. 2800 N
9	Modulus of Rupture (MOR), N/mm²	ISO 10545-4 / EN 100	> 35	Min. 38
10	Abrasion Resistance	ISO 10545-7 / EN 154	PEI III, IV, V	As Specified
11	Thermal Shock Resistance	ISO 10545-9 / EN 104	Resistant to 10 cycle	Resistant
12	Crazing Resistance	ISO 10545-11 / EN 105	No Crazing	Resistant
13	Resistance to Acids, Alkalies and Chemicals (Except HF Acid)	ISO 10545-13 / EN 106	No Visible effetct	No Visible effect
14	Resistance to staining	ISO 10545-14	Min 3	Min Class 4
15	Gloss Value (For PGVT)			> 80

WALL TILES TECHNICAL SPECIFICATION

Sr.No.	Test Description	Standard Test Method	ISO 13006:2012 E Specification	MTM’S Value
1	Deviation in Length (%)	ISO 10545-2 / EN 98	± 0.6 % ( Max ± 2.0 mm )	± 0.15 %
2	Deviation in Thickness (%)	ISO 10545-2 / EN 98	± 10.0 % ( Max ± 0.5 mm )	± 5.0 %
3	Straightness of Edge (%)	ISO 10545-2 / EN 98	± 0.5 % ( Max ± 1.5 mm )	± 0.3 %
4	Diagonal Variation (%) (Rectangularity)	ISO 10545-2 / EN 98	± 0.5 % ( Max ± 2.0 mm )	± 0.15 %
5	Surface Flatness (%)	ISO 10545 - 2 / EN 98	+ 0.5 , -0.3 ( Max +2.0 mm and -1.5 mm )	+ / - 0.25 %
6	Surface Quality (%)	ISO 10545-2 / EN 98	Min 95% free from any Visible defects	More than 95 % free from any Visible defects
7	Water Absorption (%) By Wt.	ISO 10545-3 / EN 99	≥ 10.0 %	10-20 %
8	Modulus of Rupture In N / mm²	IISO 10545 - 4 / EN 100	≥ 10	≥ 17
9	Thermal Shock Resistance	ISO 10545 - 9 / EN 10	No Visible defects	Resistance
10	Chemical Resistance (Except HF Acid)	ISO 10545 - 13 / EN 106	No Visible defects	No Visible defects
11	Resistance to Stain	ISO 10545 - 14	Manufacturer to State Class	Min. Class 3
12	MOH Scratch Hardness	EN 101	Min 4	4
13	Crazing Resistance	ISO 10545 - 14 / EN 105	No Crazing	Resistance
14	Abrasion Resistance	ISO 10545 - 7 / EN 154	PEI - II for Glossy to III for Matte	PEI - II for Glossy to III for Matte

600 x 600 MTM GVT TECHNICAL SPECIFICATIONS

Sr.No.	Test Description	Standard Test Method	ISO 13006:2012 E Specification	MTM’S Value
1	Length and Width	ISO 10545-2 / EN 98	± 0.6 % (max +/-2.0 mm)	± 0.1%
2	Thickness	ISO 10545-2 / EN 98	± 5.0 % (max +/-0.5 mm )	± 5.0%
3	Straightness in side	ISO 10545-2 / EN 98	± 0.5 % (max +/-1.5mm)	± 0.10%
4	Rectangularity	ISO 10545-2 / EN 98	± 0.5 % (max +/-2.0 mm )	± 0.15%
5	Surface flatness	ISO 10545 - 2 / EN 98	± 0.5 % ( max +2.0 mm )	± 0.20%
6	Surface Quality	ISO 10545-2 / EN 98	95% free from visible defects	> 95% free from visible defects
7	Water Absorption	ISO 10545-3 / EN 99	< 0.5%, Max 0.6%	≤0.5%
8	Breaking Strength, N	ISO 10545-4 / EN 100	Min 1300 N	> 1500 N
9	Modulus of Rupture (MOR), N/mm²	ISO 10545-4 / EN 100	> 32	> 35
10	Abrasion Resistance	ISO 10545-7 / EN 154	PEI III, IV, V	As Specified
11	Thermal Shock Resistance	ISO 10545-9 / EN 104	Resistant to 10 cycle	Resistant
12	Crazing Resistance	ISO 10545-11 / EN 105	No Crazing	Resistant
13	Resistance to Acids, Alkalies and Chemicals (Except HF Acid)	ISO 10545-13 / EN 106	No Visible effetct	No Visible effetct
14	Resistance to staining	ISO 10545-14	Min 3	Min Class 4
14	Gloss Value (For PGVT)			> 80

DOUBLE CHARGED VITRIFIED TILES SPECIFICATIONS

Sr.No.	CHARACTERISTIC	STANDARD AS PER ISO-13006/EN 14411 GROUP Bla	MEAN VALUE OF DOUBLE CHRGES	TEST METHOD
REGULATORY property
1.	Deviation in length & width	± 0.5%	± 0.1%	ISO-10545-2
2.	Deviation in thickness	± 5.0%	± 4.0%	ISO-10545-2
3.	Straightness of sides	± 0.5%	± 0.1%	ISO-10545-2
4.	Rectangularity	± 0.5%	± 0.1%	ISO-10545-2
5.	Surface Flatness	± 0.5%	± 0.2%	ISO-10545-2
6.	Color Differences	unaltered	no change	ISO-10545-16
7.	Glossiness	As per manufacturer	Min.90%	Glossameter
structural properties
1.	Water Absorption	<0.50 %	<0.05 %	ISO-10545-3
2.	Apparent Density	>2.0 g/cc	>2.10 g/cc	DIN 51082
MASSIVE Mechanical Properties
1.	Modulus of Rupture	Min 35N/mm2	Min 40N/mm2	ISO-10545-4
2.	Breaking Strength	Min 1300 n	Min 2000 n	ISO-10545-4
3.	Impect Resistance	As Per Manufacturer	Min 0.55	ISO-10545-5
Surface Mechanical Properties
1.	Surface Abrasion Resistance	As Per Manufacturer	Min.Class-3	ISO-10545-7
2.	Mohs Hardness	As Per Manufacturer	Min.4	EN 101
Thermo Hygrometric Properties
1.	Frost Resistance	No Damage	No Damage	ISO-10545-12
2.	Thermal Shock Resistance	No Damage	No Damage	ISO-10545-9
3.	Moisture Expansion	Nil	Nil	ISO-10545-10
4.	Thermo Expansion(COE)	Max 9.0 x 10*6	Max 6.5 x 10*4	ISO-10545-8
5.	Crazing Resistance	As per mfg	Min. 10 Cycle	ISO-10545-11
CHEMICAL Properties
1.	Chemical Resistance	No Damage	No Damage	ISO-10545-13
2.	Stain Resistance	Resistant	Resistant	ISO-10545-14
Safety Properties
1.	Slip Resistance	As Per Manufacturer	> 0.40	ISO-10545-17
2.	Fire Resistance	As Per Manufacturer	Fireproof	N.A
3.	Lead & Cadmium given off by glazed tiles	As Per Manufacturer	Does not yield Pb & Cd	ISO-10545-15

LAB TEST REPORT

Report - 1200X600

Report - 1600X800